Indesit Universal 1.5m Drain Hose (Straight 21mm To Right Angle End 22mm Internal Dia.s

Product Description

If your drain hose has split or is no longer removing water from your appliance efficiently, use this universal Electruepart Drain Hose to restore your appliance to working order.

At 1.5 metres long with a 21mm bore, this Drain Hose is an ideal component of a functioning laundry assembly. Learn more about drain hoses below:

What does a drain hose do?
The drain hose is used for removing the used water from your appliance. You will commonly find that drain hoses are fitted to washing machines and dishwashers. The drain hose is fitted to the stand pipe or the u bend under the sink.

Is the drain hose causing the problem?
You may want to check the drain hose if you are experiencing any of the following faults with your washing machine or dishwasher:

o Water siphoning into the washing machine
o Unpleasant odours forming in the washing machine
o Dirty water running into the machine overnight
o The drain hose is leaking
o The drain hose is blocked or torn

When should you replace a drain hose?
It is possible that over time the drain hose can become damaged and for it to develop a tear or blockage, which can ultimately cause the appliance to leak or function incorrectly. Problems can also develop if the drain hose is not correctly installed or connected to the drainage system. You may also need to replace the drain hose if the original is not long enough to reach the drainage system in your home; it is possible to purchase extra-long drain hoses to cope with such situations.

Any associated problems?
An incorrectly plumbed in washing machine can cause an array of issues. In particular if your washing machine is connected directly to the u bend under the sink, you need to ensure that the dirty water doesn't run back into the washing machine as this can cause odours to form.

How to fit a washing machine drain hose
It is important that you ensure the drain hose is correctly installed to avoid problems commonly associated with poorly plumbed in appliances. The general pointers below will help you install the replacement part:

1. Locate the drain hose connection on the washing machine/dishwasher and the drainage system it will connect to. Remember to disconnect from the power and shut off the water supply.
2. You will need to move the washing machine out from the wall to gain access to the back of the machine.
3. The next step is to remove the hose clamp in order to remove the hose. This may require you to loosen it off with a screwdriver or it may be done with pliers depending on the type of clamp used on your particular machine.
4. You can now remove the drain hose and replace, check or unblock as appropriate.
*If you are fitting the drain hose to a dishwasher the process will be very similar. Remember this is intended as general guidance and the process can vary depending on the model of appliance you own.

Expert tips for installing your new drain hose

1. The drain hose needs to be properly secured so that it doesn't fall out and result in water flooding into your kitchen or utility. To avoid this you should use a drain hose crook. This will usually be supplied with the machine but replacements are available.
2. If you are connecting the drain hose to the u bend you need to ensure the drain hose rises several inches before running into the appliance as this prevents sink water entering the machine.
3. If you're connecting to a separate stand pipe ensure you don't force the drain hose down too far as this can cause siphoning.

While you're replacing the drain hose, why not…
Check the remaining hoses, such as the hot and cold fill hoses, for any signs of damage or blockage. It is also the perfect time for routine appliance maintenance like preventing limescale build-up and cleaning the door seal.

Specification:

• 1.5 Metre Hose Length
• Bore 21 mm
• 1 x 90º end
• Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts